缓冲输出–每个
动态输入信号为
方便地在
前面板通过缓冲
输出连接器，方便
连接至便携式和
测试仪器。
键相模块–接受
每圈单事件和多事件
来自接近探头的信号
和磁性拾音器。A.
标准机架can
多可容纳四个
键相器
†
信号（两个3500/25
模块）和特殊
可在以下情况下进行修改：
四个以上键相器
需要信号。
内置本质安全（I.S.）
屏障–输入/输出模块可以
内部订购或不订购
安装I.S.屏障以减少
布线，提高准确性，减少
危险时的安装成本
环境要求本质安全
安装实践
.
模拟通信-
监视器模块通道
可用于模拟
4-20 mA比例
过程控制输出
系统和其他
仪表。
瞬态数据接口
（TDI）–提供
配置接口组件
以及单电缆
与系统1的连接
通过传统
有线或无线以太网
网络。3500的
先进的设计确保
同步数据
对所有人进行收购
机架中的通道。
每个通道的多个参数
–径向振动通道可以提供
八个单独参数（总体、差距、，
1X振幅/相位，2X振幅/相位，
非1X，Smax），表示4通道
监视器实际上提供多达32个
测量通道。警报can
设置任意或全部8个参数
每个通道。
继电器模块–
软件可编程
e投票逻辑提供
无与伦比的灵活性。4-
和16通道
可用版本。
热插拔
模块–方便
维护和
大正常运行时间，
模块可以是
删除和
重新插入时没有
卸下机架电源
.
数字通信–3500/92
通信网关支持
Modbus协议
®和Modbus/TCP协议通过
串行（RS232/422/485）或以太网链路
对于与PLC的数字通信，
DCSs和其他仪器和
自动化平台。多个网关
可以安装在单个机架中进行链接
冗余或多协议时
需要。
VGA显示模块–3500/94M
VGA模块显示所有3500
机械保护系统
信息，包括：
•系统事件列表
•报警事件列表
•所有模块和通道数据
•报警和OK状态
•九个自定义显示选项
支持10“或15”Advantech
VGA触摸屏显示。这些
紧凑耐用的显示屏
专为出色的观看质量而设计
在工业应用中。10“
Advantech display经过认证
危险环境
行业标准19“机架尺寸-
提供两倍以上的
以前的通道密度
系统。可在两个EIA机架中使用
和隔板安装版本，
连同积分（标准）或
外部现场接线终端
块（可选）大
安装灵活性

Buffered outputs – every dynamic input signal is conveniently available at the front panel via buffered output connectors for easy connection to portable and test instrumentation. Keyphasor module – accepts single- and ulti-event-per-turn signals from proximity probes and magnetic pickups. A standard rack can accommodate up to four Keyphasor † signals (two 3500/25 modules), and special modifications are available when more than four Keyphasor signals are required. Built-in Intrinsic Safety (I.S.) barriers – I/O modules can be ordered with or without internally mounted I.S. barriers to decrease wiring, increase accuracy, and reduce installation costs when hazardous environments require intrinsically safe installation practices . Analog communications – monitor module channels are available with analog 4-20 mA proportional outputs for process control systems and other instrumentation. Transient Data Interface (TDI) – provides configuration interface as well as single-cable connection to System 1 software via conventional wired or wireless Ethernet networks. The 3500’s advanced design ensures that simultaneous data acquisition occurs for all channels in the rack. Multiple parameters from each channel – radial vibration channels can provide eight individual parameters (overall, gap, 1X amplitude/phase, 2X amplitude/phase, Not 1X, Smax), meaning a 4-channel monitor actually provides up to 32 channels of measurements. Alarms can be set on any or all 8 parameters from each channel. Relay modules – software-programmabl e voting logic provides unmatched flexibility. 4- and 16-channel versions available. Hot-swappable modules – for ease of maintenance and maximum uptime, modules can be removed and reinserted without removing rack power . Digital communications – the 3500/92 Communications Gateway supports Modbus ® and Modbus/TCP protocols via serial (RS232/422/485) or Ethernet links for digital communications with PLCs, DCSs, and other instrument and automation platforms. Multiple gateways can be installed in a single rack for link redundancy or when multiple protocols are needed. VGA display module – The 3500/94M VGA module displays all 3500 machinery protection system information, including: • System event list • Alarm event list • All module and channel data • Alarm and OK status • Nine Custom display options Supports either the 10" or 15" Advantech VGA touch screen displays. These compact, durable displays are designed for excellent viewing quality in industrial applications. The 10" Advantech display is certified for hazardous environments Industry-standard 19” rack size – provides more than twice the channel density of previous systems. Available in both EIA rack and bulkhead mounting versions, along with integral (standard) or external field wiring termination blocks (optional) for maximum installation flexibility