21/4WRDE
符合EN 55011 A级（工业环境）电磁兼容性（EMC）标准的发射标准符合EN 61000-4-2（ESD）评估标准B电磁兼容性（EMC）标准符合EN 61000-4-4（突发）评估标准B电磁兼容性（EMC）标准符合EN 61000-4-5（浪涌）评估标准B电磁兼容性（EMC）标准根据EN 61000-4-5（高频场）-电磁兼容性（EMC）-根据EN 61000-4-6（高频线）-图7-4：电磁兼容性数据8标准8.1使用标准标准说明EN 61131-2可编程逻辑控制器DIN EN 60529外壳防护等级（IP代码）DIN EN 61000-6-2通用标准-工业环境抗扰度DIN EN 50081-2电磁兼容性（EMC）-通用发射标准DIN EN 60204-1机械安全-机械电气设备DIN IEC 60060-1高压测试技术DIN EN 60068-2-1、2、6、14、27、30、31、32环境测试DIN EN 61000-4-2、3、4、5、6、，12电磁兼容性（EMC）DIN EN 60950信息技术设备-安全EN 50178电力装置用电子设备UL 508工业控制设备图8-1：使用标准DOK-CONTRL-PPC-R22.1**-IT01-EN-P力士乐IndraControl PPC-R22.1 Control Bosch Rexroth AG标准13/33 8.2 CE标记8.2.1符合性声明如本说明书所述，符合以下欧盟指令的要求和目标以及以下统一的欧洲标准：EMC指令2004/108/EC本指令中描述的电子产品旨在用于工业环境，并符合以下要求：标准标题版DIN EN 50081-2电磁兼容性（EMC）电磁兼容性（EMC）.通用发射标准第2部分：工业环境德国版EN 50081-2:1993 1994年3月DIN EN 61000-6-2电磁兼容性（EMC）第6-2部分：通用标准-工业环境抗噪声性（IEC 61000-6-2:2005）德国版EN 61000-6-2:1999 2001年4月图8-2：电磁兼容性（EMC）标准由于对设备进行修改，导致不符合CE要求。CE标记仅对处于交付状态的设备有效。在对设备进行修改后，应验证CE符合性。8.2.2 UL/CSA认证设备根据● UL508（工业控制设备）和● C22.2编号14-M95（CSA）UL文件编号E210730但是，可能存在认证有限或缺失的组合或扩展阶段。因此，根据设备上的UL标记验证注册。

Emission standards acc. to EN 55011 Class A (industrial environment) Electromagnetic compatibility (EMC) ac‐ cording to EN 61000-4-2 (ESD) Evaluation criterion B Electromagnetic compatibility (EMC) ac‐ cording to EN 61000-4-4 (burst) Evaluation criterion B Electromagnetic compatibility (EMC) ac‐ cording to EN 61000-4-5 (surge) Evaluation criterion B Electromagnetic compatibility (EMC) ac‐ cording to EN 61000-4-5 (HF-fields) - Electromagnetic compatibility (EMC) ac‐ cording to EN 61000-4-6 (HF-lines) - Fig.7-4: Electromagnetic compatibility data 8 Standards 8.1 Used Standards Standard Description EN 61131-2 Programmable logic controllers DIN EN 60529 Degrees of protection provided by enclosures (IP Code) DIN EN 61000-6-2 Generic standards - Immunity for industrial environments DIN EN 50081-2 Electromagnetic compatibility (EMC) - Generic emission standard DIN EN 60204-1 Safety of machinery - Electrical equipment of machines DIN IEC 60060-1 High-voltage test techniques DIN EN 60068-2-1, 2, 6, 14, 27, 30, 31, 32 Environmental testing DIN EN 61000-4-2, 3, 4, 5, 6, 12 Electromagnetic compatibility (EMC) DIN EN 60950 Information technology equipment - Safety EN 50178 Electronic equipment for use in power installations UL 508 Industrial Control Equipment Fig.8-1: Used standards DOK-CONTRL-PPC-R22.1**-IT01-EN-P Rexroth IndraControl PPC-R22.1 Control Bosch Rexroth AG Standards 13/33 8.2 CE Marking 8.2.1 Declaration of Conformity The electronic products that are described in the present instructions, comply with the requirements and the target of the following EU directive and with the following harmonized European standards: EMC directive 2004/108/EC The electronic products described in the present instructions are intended for use in in‐ dustrial environments and comply with the following requirements: Standard Title Edition DIN EN 50081-2 Electromagnetic Compatibility (EMC) Electromagnetic compatibility (EMC) - Generic emission standard part 2: Industrial environment German edition EN 50081-2:1993 March 1994 DIN EN 61000-6-2 Electromagnetic Compatibility (EMC) Part: 6-2: Generic standards – noise immunity for industrial environments (IEC 61000-6-2:2005) German edition EN 61000-6-2:1999 April 2001 Fig.8-2: Standards for electromagnetic compatibility (EMC) Non-compliance with CE conformity due to modifications to the device. The CE marking is only valid for the device in its delivery status. After hav‐ ing modified the device, the CE conformity is to be verified. 8.2.2 UL/CSA Certified The devices are certified according to ● UL508 (Industrial Control Equipment) and ● C22.2 No. 14-M95 (CSA) UL File No. E210730 However, there can be combinations or extension stages with limited or missing certifi‐ cation. Thus, verify the registration according to the UL marking on the device.