234271-10388-A06
Z C D 4 F 63±0.2 3 2 Y 1）更大，带有一些选项。相应特征下显示了当时适用的尺寸。27ø9 k6 2.5 20-0.2ø12 j6 4 R1 1x15°详图Y 20-0.1 Pg 13.5反馈连接器：INS 513和INS 512必须作为可能的类型单独订购。尺寸表尺寸。根据DIN 42955，公差等级R，12/81版，轴的同心度、偏心度和同轴度轴端符合DIN 7483节，7/75版，IEC 72，1971版，圆柱形•中心孔DS M3-8符合DIN 3322节，5/83版•中心孔螺纹中螺钉的大拧紧力矩MA：0.5 Nm•平衡等级N符合DIN VDE 053014节，2/93版法兰类型符合DIN 42948，11/65版，使安装成为可能•根据设计B5（法兰中的通孔）•根据设计B14（法兰中的螺纹），必须单独订购电机电源接头INS 252。电源连接在下订单时选择电源接头的输出方向。可能的输出方向为：•A侧或•B侧•向右•向左。图纸将B侧描述为输出方向。任何其他输出方向的尺寸都是通过围绕Z轴转动连接器外壳来获得的

Z C D 4 F 63 ±0.2 3 2 Y 1) Bigger with some options. The then applicable dimension is indicated under the respective feature. 27 ø9 k6 2.5 20 -0.2 ø12 j6 4 R1 1x15° Detail Y 20 -0.1 Pg 13.5 Feedback connector: INS 513 and INS 512 must be ordered separately as possible types. Dimensional table Dim. A Concentricity, excentricity and coaxiality to the shaft per DIN 42955, tolerance class R, 12/81 edition. • Shaft end per DIN 748 section 3, 7/75 edition, IEC 72, 1971 edition, cylindrical • Center hole DS M3-8 per DIN 332 section 2, 5/83 edition • Max. tightening torque MA for screws in the threads of the center hole: 0.5 Nm • Balance class N per DIN VDE 0530 section 14, 2/93 edition Flange type per DIN 42948, 11/65 edition, makes mounting possible • as per design B5 (throughholes in flange) • as per design B14 (threads in flange) Motor power connector INS 252 must be ordered separately.Power connection The output direction of the electrical power connector is selected at the time the order is placed. Possible output direction is either: • side A or • side B • to the right • to the left The drawing depicts side B as output direction. The dimensions of any other output direction are obtained by virtually turning the connector housing around the Z