MAC071C-0-NS-2-​C/095-A-0/S001
输出轴：不带轴密封（仅限MAC 063）IP 50带轴密封IP 65电源连接和鼓风机电机连接IP 65用于转速反馈和安装编码器IP 65冷却IP 24鼓风机电机IP 44第二轴端IP 65 FAMACBELÜFT MAC带轴向冷却MAC带径向冷却3 MAC带自然对流3 1 2 MAC带第二轴端MAC带安装编码器1 2 1
环境机械条件MAC伺服电机可在符合IEC 721-3-3（1987版）或EN 60721-3-3（1994年6月版）的防风雨条件下以固定方式运行：•根据3M1级电机纵轴，根据3M6级电机横轴。因此，图2.5中规定的大值适用于MAC伺服电机的运输和操作。图2.5：环境变量的大值输出轴：无轴密封（仅限MAC 063）IP 50，带轴密封IP 65电源连接和鼓风机电机连接IP 65，用于转速反馈和安装编码器IP 65冷却IP 24鼓风机电机IP 44第二轴端IP 65 FAMACBELÜFT MAC，带轴向冷却MAC，带径向冷却3 MAC，带自然对流3 1 2 MAC第二轴端MAC安装编码器1 2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 6环境变量单位大值纵轴大值横轴正弦振荡偏移幅度mm 0.3 7.0频率范围Hz 2至9 2至9加速度幅度m/s2 1 20频率范围Hz 9至200 9至200次冲击总冲击响应谱-符合IEC 721-1的L型1990年版，表1第6节II型符合IEC 721-1 1990年版，表1第6节参考加速度（IEC 721-1峰值加速度）m/s2 40 250持续时间ms 22 6

Output shaft: without shaft sealing (MAC 063 only) IP 50 with shaft sealing IP 65 Power connection and blower motor connection IP 65 Connection for tacho feedback and mounted encoder IP 65 Cooling IP 24 Blower motor IP 44 Second shaft end IP 65 FAMACBELÜFT MAC with axial cooling MAC with radial cooling 3 MAC with natural convection 3 1 2 MAC with second shaft end MAC with mounted encoder 1 2 1
Ambient mechanical conditions MAC servo motors can be operated in a stationary manner under weatherproofed conditions as per IEC 721-3-3, the 1987 edition, or EN 60721-3-3 the 6/94 edition: • as per class 3M1 respective the longitudinal axis of the motor and • as per class 3M6 respective the lateral axis of the motor. The maximum values stated in Figure 2.5 thus apply to transportation and operation of MAC servo motors. Fig 2.5: Maximum values of the environmental variables Output shaft: without shaft sealing (MAC 063 only) IP 50 with shaft sealing IP 65 Power connection and blower motor connection IP 65 Connection for tacho feedback and mounted encoder IP 65 Cooling IP 24 Blower motor IP 44 Second shaft end IP 65 FAMACBELÜFT MAC with axial cooling MAC with radial cooling 3 MAC with natural convection 3 1 2 MAC with second shaft end MAC with mounted encoder 1 2 1 2 3 4 5 1 2 3 4 5 1 2 4 5 3 1 2 3 6 6 Environmental variables Unit Maximum values longitudinal axis Maximum values lateral axis sinusoidal oscillations excursion amplitude mm 0.3 7.0 frequency range Hz 2 to 9 2 to 9 acceleration amplitude m/s2 1 20 frequency range Hz 9 to 200 9 to 200 shocks total shockresponse spectrum - Type L per IEC 721-1 edition of 1990, table 1 section 6 Type II per IEC 721-1 edition of 1990, table 1 section 6 reference acceleration (in IEC 721-1 peak acceleration) m/s2 40 250 duration ms 22 6