VDIMC5025CM
可用型号这些恒温器配备先进的主动占用逻辑，
这将自动将占用级别从已占用切换到备用和未占用
是否存在当地活动所需。此占用功能提供
在占用时间内节约能源，同时不牺牲乘员舒适度。
所有VT7000系列恒温器均可作为VI-PIR盖就绪型号提供（VI-PIR盖可在以下情况下添加
需要）或工厂组装（VI-PIR盖工厂安装）。
与VI-PIR盖兼容的恒温器使用以下零件号分配：VT7xxxxX5000（X）。5号
表示节温器底座具有必要的板载极化PIR连接器，并增加了功能。
工厂组装的PIR恒温器（包括VI-PIR盖）使用以下零件号分配：
VT7xxxxX5500（X）。55表示恒温器带有工厂安装的VI-PIR盖。
例如，VI-PIR cover ready型号应具有以下型号：VT7300F5000B和PIR型号
工厂安装的VI-PIR盖的型号为VT7300F5500B
参数名称功能范围/选项
St By TM
备用计时器值。PIR
封面检测到该区域的后一次移动以及
恒温器备用模式和设定点变为激活状态。
0.5至24小时，增量为0.5小时
优尼科TM
未占用计时器值。在
恒温器切换到待机模式，以及恒温器
未占用模式和设定点变为激活状态。
出厂值或0.0小时：将此参数设置为其默认值
0.0小时将禁用未占用计时器。这可防止恒温器
当PIR功能为
习惯于
0.0至24小时，增量为0.5小时
St By HT
备用加热设定值。此参数的值应位于
在已占用和未占用的加热设定点之间，并确保
备用值和占用值之间的差值可以是
在区域内检测到移动时及时恢复。
40至90°F（4.5至32.0°C）
按CL排序的St
备用冷却设定值。此参数的值应位于
在已占用和未占用冷却设定点之间，并确保
备用值和占用值之间的差值可以是
在区域内检测到移动时及时恢复。
54至100°F（12.0至37.5°C）
特定于PIR型号的配置参数
VT7000X5000/VT7000X5500系列PIR就绪恒温器
在型号末尾，为BACnet型号添加B，为梯队型号添加E，为ZigBee无线型号添加W。例如：VT76xxX5000B，这些恒温器配有主动占用逻辑，
这将自动将占用级别从已占用切换到备用和未占用
是否存在当地活动所需。此占用功能提供
在占用时间内节约能源，同时不牺牲乘员舒适度。

Available Models These thermostats are equipped with advanced active occupancy logic,
which will automatically switch occupancy levels from occupied to stand-by and unoccupied as
required by local activity being present or not. This advanced occupancy functionality provides
advantageous energy savings during occupied hours without sacrificing occupant comfort.
All VT7000 series thermostats are available as VI-PIR cover ready models (VI-PIR cover could be added when
needed) or factory assembled (VI-PIR cover factory installed).
Thermostats compatible with VI-PIR covers use the following part number assignments: VT7xxxxX5000(X). The 5
indicates that the thermostat’s base has the necessary onboard polarized PIR connector and functionality added.
Factory assembled PIR thermostats (VI-PIR cover included) use the following part number assignments:
VT7xxxxX5500(X). The 55 indicates that the thermostat comes with factory installed VI-PIR cover.
For example, a VI-PIR cover ready model would have the following model number: VT7300F5000B and a PIR model
with factory installed VI-PIR cover would have this model number VT7300F5500B
Parameter name Function Range/Options
St-By TM
Stand-by Timer value. Time delay between the moment where the PIR
cover detected the last movement in the area and the time which the
thermostat stand-by mode and setpoints become active.
0.5 to 24 hours in 0.5hr increments
Unocc TM
Unoccupied Timer value. Time delay between the moment where the
thermostat toggles to stand-by mode and the time which the thermostat
unoccupied mode and setpoints become active.
The factory value or 0.0 hours: Setting this parameter to its default value
of 0.0 hours disables the unoccupied timer. This prevents the thermostat
to drift from stand-by mode to unoccupied mode when PIR functions are
used
0.0 to 24 hours in 0.5hr increments
St-By HT
Stand-by heating setpoint. The value of this parameter should reside
between the occupied and unoccupied heating setpoints and make sure
that the difference between the stand-by and occupied value can be
recovered in a timely fashion when movement is detected in the zone.
40 to 90 °F ( 4.5 to 32.0 °C )
St-By CL
Stand-by cooling setpoint. The value of this parameter should reside
between the occupied and unoccupied cooling setpoints and make sure
that the difference between the stand-by and occupied value can be
recovered in a timely fashion when movement is detected in the zone.
54 to 100 °F ( 12.0 to 37.5 °C )
Configuration Parameters Specific to PIR Models
VT7000X5000/VT7000X5500 Series PIR Ready Thermostats
At the end of the model number add B for BACnet models, E for Echelon models or W for ZigBee wireless models. Ex: VT76xxX5000B, These thermostats are equipped with advanced active occupancy logic,
which will automatically switch occupancy levels from occupied to stand-by and unoccupied as
required by local activity being present or not. This advanced occupancy functionality provides
advantageous energy savings during occupied hours without sacrificing occupant comfort.