VDIF0646463505
该设备允许您编辑参数、启动工作模式点动或通过
集成人机界面（HMI）。诊断信息（如参数值或错误
代码）也可以显示。有关调试和运行的各个章节包括信息
是否可以通过集成HMI执行功能或调试软件
必须使用。
概述
1个状态指示灯
2个7段显示器
3 ESC键
4导航按钮
5红色LED亮起：直流母线上存在电压
状态LED和4位7段显示屏指示设备状态、菜单名称、参数
代码、状态代码和错误代码。通过转动导航按钮，您可以选择菜单级别和
参数和增量或减量值。要确认选择，请按导航按钮。
ESC（Escape）按钮允许您退出参数和菜单。如果显示值，则ESC
按钮可用于返回上次保存的值。
HMI上的字符集
下表显示了4位数字7显示的符号的字符分配-
段显示。

The device allows you to edit parameters, start the operating mode Jog or perform autotuning via the integrated Human-Machine Interface (HMI). Diagnostics information (such as parameter values or error codes) can also be displayed. The individual sections on commissioning and operation include information on whether a function can be carried out via the integrated HMI or whether the commissioning software must be used. Overview 1 Status LEDs 2 7-segment display 3 ESC key 4 Navigation button 5 Red LED on: Voltage present at DC bus Status LEDs and a 4-digit 7-segment display indicate the device status, menu designation, parameter codes, status codes and error codes. By turning the navigation button, you can select menu levels and parameters and increment or decrement values. To confirm a selection, press the navigation button. The ESC (Escape) button allows you to exit parameters and menus. If values are displayed, the ESC button lets you return to the last saved value. Character Set on the HMI The following table shows the assignment of the characters to the symbols displayed by the 4-digit 7- segment display.