VDI9940
本产品的泄漏电流大于3.5 mA。如果保护接地连接中断，
如果接触外壳，可能会产生危险的接触电流。
产品中央接地螺钉位于前侧底部。
下图显示了设备版本LXM32MU45。。。LXM32MD72。
危险
接地不足
 使用至少10 mm2（AWG 6）的保护接地导线或两根保护接地导线
为电源端子供电的导线横截面。
 验证是否符合所有当地和国家电气规范要求以及所有其他适用要求
有关所有设备接地的规定。
 施加电压前，将驱动系统接地。
 不得将导管用作保护接地导体；在内部使用保护接地导体
管道
 不要将电缆屏蔽用作保护接地导体。
不遵守这些说明将导致死亡或重伤。

This product has a leakage current greater than 3.5 mA. If the protective ground connection is interrupted, a hazardous touch current may flow if the housing is touched. The central grounding screw of the product is located at the bottom of the front side. The figure below shows the device versions LXM32MU45 ... LXM32MD72. DANGER INSUFFICIENT GROUNDING  Use a protective ground conductor with at least 10 mm2 (AWG 6) or two protective ground conductors with the cross section of the conductors supplying the power terminals.  Verify compliance with all local and national electrical code requirements as well as all other applicable regulations with respect to grounding of all equipment.  Ground the drive system before applying voltage.  Do not use conduits as protective ground conductors; use a protective ground conductor inside the conduit.  Do not use cable shields as protective ground conductors. Failure to follow these instructions will result in death or serious injury.