NW-BM85S485
离子范围/选项
St By TM
备用计时器值。PIR
封面检测到该区域的后一次移动以及
恒温器备用模式和设定点变为激活状态。
0.5至24小时，增量为0.5小时
优尼科TM
未占用计时器值。在
恒温器切换到待机模式，以及恒温器
未占用模式和设定点变为激活状态。
出厂值或0.0小时：将此参数设置为其默认值
0.0小时将禁用未占用计时器。这可防止恒温器
当PIR功能为
习惯于
0.0至24小时，增量为0.5小时
St By HT
备用加热设定值。此参数的值应位于
在已占用和未占用的加热设定点之间，并确保
备用值和占用值之间的差值可以是
在区域内检测到移动时及时恢复。
40至90°F（4.5至32.0°C）
按CL排序的St
备用冷却设定值。此参数的值应位于
在已占用和未占用冷却设定点之间，并确保
备用值和占用值之间的差值可以是
在区域内检测到移动时及时恢复。
54至100°F（12.0至37.5°C）
特定于PIR型号的配置参数
VT7000X5000/VT7000X5500系列PIR就绪恒温器
A.

ion Range/Options St-By TM Stand-by Timer value. Time delay between the moment where the PIR cover detected the last movement in the area and the time which the thermostat stand-by mode and setpoints become active. 0.5 to 24 hours in 0.5hr increments Unocc TM Unoccupied Timer value. Time delay between the moment where the thermostat toggles to stand-by mode and the time which the thermostat unoccupied mode and setpoints become active. The factory value or 0.0 hours: Setting this parameter to its default value of 0.0 hours disables the unoccupied timer. This prevents the thermostat to drift from stand-by mode to unoccupied mode when PIR functions are used 0.0 to 24 hours in 0.5hr increments St-By HT Stand-by heating setpoint. The value of this parameter should reside between the occupied and unoccupied heating setpoints and make sure that the difference between the stand-by and occupied value can be recovered in a timely fashion when movement is detected in the zone. 40 to 90 °F ( 4.5 to 32.0 °C ) St-By CL Stand-by cooling setpoint. The value of this parameter should reside between the occupied and unoccupied cooling setpoints and make sure that the difference between the stand-by and occupied value can be recovered in a timely fashion when movement is detected in the zone. 54 to 100 °F ( 12.0 to 37.5 °C ) Configuration Parameters Specific to PIR Models VT7000X5000/VT7000X5500 Series PIR Ready Thermostats A