NTCF03
ArTu K系列由一系列模块化配电盘套件组成，适用于四种不同深度（150、225、300、500、700和800 mm）的落地安装，防护等级为IP31（无前门）、IP41（带前门和通风侧板）或IP65（带前门和盲侧板），其中可以安装System pro M模块化设备，全系列塑壳断路器——Tmax XT、Tmax T和Emax断路器X1、E1、E2、E3和E4。ArTu配电盘有三种功能宽度：400 mm，用于安装630 A（T5）以下的塑壳断路器600 mm，这是安装所有设备的基本尺寸；-800 mm，用于在落地式配电盘结构内创建侧电缆容器，或用于使用相同宽度的面板。可用的内部空间高度从600毫米（壁装L系列）到2000毫米（落地式M系列和K系列），因此为各种应用要求提供了一种可能的解决方案。
ArTu PB系列（配电盘和盘组装）ArTu系列现在升级为新的ArTu PB配电盘解决方案。ArTu PB配电盘适用于进线电流高达800A，出线馈线高达250A的配电应用。ArTu PB配电板由于其新设计的框架而非常坚固，它既有壁挂式版本，也有落地式版本。ABB公司的T1-XTU和Tmax-XTU-2插件板的设计非常灵活，可方便地将Tmax-XTU和Tmax-XTU-2插件连接到新的系统上。根据要求，结构的所有侧面都有扩展盒，用于计量。垂直线槽系统在塑壳断路器层后面运行，允许轻松接入每个附件接线（SR、UV、AUX触点）。ArTu PB配电板作为标准配置提供，带有一扇盲板门，也有一扇玻璃门。ArTu K系列A

NTCF03
​​​​​​​ArTu K series consists of a range of modular switchboard kits for floor-mounted installation with four different depths (150, 225, 300, 500, 700 and 800 mm) and with degree of protection IP31 (without front door), IP41 (with front door and ventilated side panels) or IP65 (with front door and blind side panels), in which it is possible to mount System pro M modular devices, the whole range of moulded-case circuit–breakers Tmax XT, Tmax T and Emax circuit-breakers X1, E1, E2, E3 and E4. ArTu switchboards have three functional widths: - 400 mm, for the installation of moulded-case circuit-breakers up to 630 A (T5); - 600 mm, which is the basic dimension for the installation of all the apparatus; - 800 mm, for the creation of the side cable container within the structure of the floor-mounted switchboard or for the use of panels with the same width. The available internal space varies in height from 600 mm (wall-mounted L series) to 2000 mm (floor-mounted M series and K series), thus offering a possible solution for the most varied application requirements.
ArTu PB Series (Panelboard and Pan Assembly) The ArTu line is now upgraded with the new ArTu PB Panelboard solution. The ArTu PB Panelboard is suitable for distribution applications with an incomer up to 800A and outgoing feeders up to 250A. The ArTu PB Panelboard is extremely sturdy thanks to its new designed framework and it is available both in the wall-mounted version as well as in the floor-mounted one. ArTu PB Panelboard customisation is extremely flexible due to the smart design based on configurations of 6, 12 and 18 outgoing ways and to the new ABB plug-in system that allows easy and fast connections for Tmax XT1-XT2-XT3 and Tmax T1-T2-T3. Upon request, extension boxes are available on all sides of the structure, for metering purposes too. The vertical trunking system is running behind the MCCB’s layer allowing easy access to every accessory wiring (SR’s, UV’s, AUX contacts). The ArTu PB Panelboard, supplied as a standard with a blind door, is available with a glazed one as well. ArTu K series A