Some examples follow:
 CD00 - constant digital reset
 CD01 - constant digital set
 CI25 - constant integer 25
 CF3.14 - constant floating point value 3.14
 CS25.7 - constant floating point value 25.7 with good status
During operation, the constant value will be placed in the Modbus message in place
of a dynamic module LC memory base value.
B-3.2. Set Command
The set command is used to put a value into an LC module memory location. A
common application would be to flag an occurrence to the Controller by setting a
digital to TRUE independently of the data received from the Modbus slave. For
example:
 F0100, SET, 1, 200
This will place the value 200 in location 100. The unit address of 1 is ignored.
B-3. Command Extensions
U0-1135 B-4 11/98
Westinghouse Proprietary Class 2C
B-3.3. Delay Command
The delay command is used to suspend processing of a point group for a specified
period of time.

以下是一些例子：
CD00-恒定数字复位
CD01-恒定数字设置
CI25-常数整数25
CF3。14-固定浮点值3.14
CS25。7-状态良好的固定浮点值25.7
在操作过程中，恒定值将被放置在Modbus消息中
动态模块LC内存基值。
B-3.2。设置命令
set命令用于将值输入LC模块内存位置。A.
常见的应用是通过设置
独立于从Modbus从站接收的数据，数字转换为真。对于
例子：
F0100，集合，1200
这将在位置100中放置值200。忽略1的单元地址。
B-3。命令扩展
U0-1135 B-4 11/98
西屋专有2C级
B-3.3。延迟命令
延迟命令用于在指定的时间内暂停对点编组的处理
一段时间。